Prepare with reliable 300-110 Pass-King Test Braindumps

A community bank has three campus locations and one HQ with the data center. Each campus has four Cisco Catalyst 9120 APs. Poor WAN uplinks cause impacted connectivity back to HQ, and each campus is planned to have its own EWC controller based on C9120 AP to keep traffic local. Guest WLAN will be routed locally. Employee WLAN must be authenticated 802.1x PEAP via HQ ISE but can pass traffic locally once authenticated. HQ WLC will be the primary backup WLC for each WLC. Which design approach should the consulting engineer take?

• A. One C9120 AP in each campus must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN, and employee WLAN will need the HQ AAA server to be added to EWC.
• B. Two C9120 campus APs must be converted to EWC mode, one for the active controller and the other for standby with HQ WLC as N+1 backup. The campus guest WLAN will use the guest anchor to HQ WLC for guest VLAN access, and employee WLAN will need the HQ AAA server added to EWC.
• C. One C9120 campus AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC paired as mobility peer and configured as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN. The campus employee WLAN will need the guest anchor back to the HQ employee WLAN.
• D. Two C9120 campus APs must be converted to EWC mode, one for the active controller and the other for standby set as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN, and employee WLAN will need the HQ AAA server added to EWC.

A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?

• A. Set the XOR radio role to Monitor mode and the slot 1 radio to Client Serving on all the APs.
• B. Set the XOR radio role to Sniffer mode and the slot 1 radio to Client Serving on all the APs.
• C. Set the XOR radio role to Client Serving and the slot 1 radio to Sniffer mode on all the APs.
• D. Set the XOR radio role to Client Serving and the slot 1 radio to Monitor mode on all the APs.

An engineer is performing a Layer 1 passive wireless site survey utilizing a channel analyzer software in the 2.4 GHz spectrum. Which chart indicates the ratio of interference present during the duration of the capture?

• A.
  
• B.
  
• C.
  

In a FlexConnect deployment, which role does the site tag play?

• A. It assigns IP addresses to wireless clients for the site APs.
• B. It defines the roaming domain for FlexConnect APs.
• C. It configures the switch port settings for FlexConnect APs.
• D. It manages the firewall policies for the site APs.

A customer wants to provide wireless coverage in a parking lot outside of a building. An engineer determines that three APs are required. The APs can be mounted on the light poles in the parking lot because there are cable routes already in place for these locations. The closest wiring closet is approximately 200 meters away. Which setup powers and connects the APs back to the customer network?

• A. Category 6 UTP cabling and PoE+
• B. fiber connectivity with an AC/DC power module
• C. category 6 UTP cabling and Cisco UPOE
• D. fiber connectivity with 802.3af