EMC D-PSC-MN-23 Real Exam Questions and Answers FREE
Exam Dumps D-PSC-MN-23 Practice Free Latest EMC Practice Tests
NEW QUESTION # 45
When preparing a site for PowerScale installation, which of the following considerations are crucial?
(Select two)
- A. Ensuring that the flooring is anti-static
- B. Confirming that data center staff are trained on PowerScale hardware
- C. Preparing an emergency evacuation plan specific to the data center
- D. Verifying environmental controls are within recommended parameters
Answer: A,D
NEW QUESTION # 46
What is the importance of documenting the cabling layout in a PowerScale environment?
- A. It facilitates future upgrades and maintenance.
- B. It ensures compliance with data center standards.
- C. It helps in identifying and resolving connectivity issues.
- D. It aids in the optimization of data transfer speeds.
Answer: A
NEW QUESTION # 47
What does the process of smartfailing a node involve?
- A. Physically replacing the node hardware
- B. Temporarily removing the node from service
- C. Updating the cluster configuration database
- D. Transferring data to other nodes in the cluster
Answer: B
NEW QUESTION # 48
What is the first step in planning the installation of a PowerScale cluster?
- A. Calculating the total power consumption
- B. Designing the network topology
- C. Determining the optimal operating system version
- D. Assessing the physical environment for suitability
Answer: D
NEW QUESTION # 49
Which service procedure can be performed on a Dell PowerScale Gen 6 node without first having to power it down?
- A. Reseat network cable
- B. Reseat Gen 6 node
- C. Replace FRU component
- D. Replace CRU component
Answer: D
NEW QUESTION # 50
What is the recommended way to install a Dell PowerScale Gen 6 compute module in a chassis?
- A. Close the module lever and slide the module into the chassis until it clicks.
- B. Support the node with both hands and slide it into the node bay.
- C. Loosen the thumbscrew on the release lever then slide the compute module into the chassis.
- D. Slide the release lever to the right and guide the node into the chassis.
Answer: B
NEW QUESTION # 51
In a Dell PowerScale Gen 6 cluster, which nodes work as a pair?
- A. Nodes in slots 2 and 4
- B. Nodes in slots 1 and 3
- C. Nodes in slots 2 and 3
- D. Nodes in slots 1 and 2
Answer: D
NEW QUESTION # 52
A company is adding A200 nodes that have 10GigE back-end ports into their existing Dell PowerScale cluster of H500 nodes with 40GigE back-end ports. A platform engineer is asked to install the new nodes.
What is a consideration for the back-end network in a mixed cluster?
- A. Connecting PowerScale nodes with different back-end speeds to the same back-end switch is only supported using breakout cables
- B. PowerScale nodes with different back-end speeds can connect to the same back-end switch
- C. Connecting PowerScale nodes with different back-end speeds to the same back-end switch is only possible if the backend is InfiniBand
- D. PowerScale nodes with different back-end speeds cannot be connected to the same back-end switch
Answer: B
NEW QUESTION # 53
Which of the following considerations is crucial when planning the installation of a PowerScale cluster?
- A. Planning for future expansion
- B. Ensuring sufficient cooling in the data center
- C. Securing adequate power supply
- D. All of the above
Answer: D
NEW QUESTION # 54
What type of NIC is used for the external network on a Dell PowerScale F200 node?
- A. Dual port 10/40 GbE or single port 100GbE
- B. Dual port 10/25 GbE or dual port 40/100 GbE
- C. Dual port 10/100 GbE
- D. Single port 10 GbE or dual port 25/40 GbE
Answer: B
NEW QUESTION # 55
Which tools are indispensable for maintaining compliance within a PowerScale cluster? (Select two)
- A. File system auditing tools
- B. Network traffic analyzers
- C. Automated policy enforcement engines
- D. Configuration management databases
Answer: A,C
NEW QUESTION # 56
A customer is planning to add a node to a Dell PowerScale cluster running OneFS 9.0.
Which command can they use from the CLI?
- A. isi devices -add
- B. isi devices node add --serial-number=<SN>
- C. isi node add --node-lnn
- D. isi devices node add --node-lnn
Answer: B
NEW QUESTION # 57
When reimaging a node in the context of PowerScale, what is the primary goal?
- A. To restore the node's original factory settings
- B. To update the node's BIOS settings
- C. To ensure the node's firmware is up to date
- D. To install a new operating system version
Answer: D
NEW QUESTION # 58
When should the customer engineer document and register a Dell PowerScale system in the install base record?
- A. After racking the system
- B. Before racking the system
- C. After OneFS has been initialized and configured
- D. Before OneFS has been initialized, configured, and updated
Answer: A
NEW QUESTION # 59
A platform engineer needs to replace the fan on Dell PowerScale Gen 6 hardware.
Where can they find the fan module?
- A. Compute module
- B. Suitcase
- C. Front panel
- D. Midplane
Answer: A
NEW QUESTION # 60
What is the primary purpose of conducting a PowerScale node health check before maintenance?
- A. To identify any failing components
- B. To verify network connectivity
- C. To ensure data replication is complete
- D. To assess storage capacity utilization
Answer: A
NEW QUESTION # 61
A Dell PowerScale Gen 6 chassis is being installed. The chassis has been aligned with the rails.
What is the correct order of steps to finish the installation?
- A. 1. Push the node off the lift arms and into the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor. - B. 1. Secure the lift casters on the floor.
2. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
3. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
4. Push the node off the lift arms and into the rack.
5. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack. - C. 1. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
2. Push the node off the lift arms and into the rack.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor. - D. 1. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Secure the lift casters on the floor.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Push the node off the lift arms and into the rack.
Answer: B
NEW QUESTION # 62
A platform engineer has added an F200 node to a Dell PowerScale cluster. The cluster now has five F200 nodes.
Before leaving the site, what action must they perform?
- A. SmartFail the node and rejoin to the cluster
- B. Ensure the node LNN is set to 1
- C. Reboot the node and wait for a green status
- D. Test for node connectivity and normal function
Answer: D
NEW QUESTION # 63
What connectivity tests performed after the initial configuration of a Dell PowerScale cluster?
- A. SSH, PuTTy, ping, and HTTP
- B. Client, NFS, ping, and WinSCP
- C. WinSCP, DNS, ping, and SSH
- D. WebUI, HTTPS, DNS, and Client
Answer: D
NEW QUESTION # 64
......
Verified D-PSC-MN-23 Exam Dumps Q&As - Provide D-PSC-MN-23 with Correct Answers: https://surepass.actualtests4sure.com/D-PSC-MN-23-practice-quiz.html
