Jan-2022 Realistic HPE6-A71 Exam Dumps with Accurate & Updated Questions
HPE6-A71 Exam Dumps - PDF Questions and Testing Engine
HP HPE6-A71 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 53
An administrator wants to implement a cluster of Aruba Mobility Controllers (MCs). Which guideline should be followed?
- A. Purchase a cluster license to enable clustering
- B. Implement Virtual Mobility Controllers and Mobility Controllers in the cluster to provide scalability.
- C. Implement High Availability (HA) AP Fast Failover for redundancy.
- D. Verify that all the controllers run the same release of software.
Answer: D
NEW QUESTION 54
What must the administrator configure on AirWave to monitor and run operational commands on the Aruba Mobility Masters (MMs) and Mobility Controllers (MCs)?
- A. PAPI and SNMP
- B. SNMP and SSH/telnet
- C. PAPI and SSH/telnet
- D. SNMP and HTTPS
Answer: B
NEW QUESTION 55
An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?
- A. From the controller's ArubaOS, execute write erase all.
- B. From the AP's ArubaOS CLI, execute write erase all.
- C. From apboot mode, execute factory_reset.
- D. From apboot mode, execute purgeenv.
Answer: D
NEW QUESTION 56
An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM). The administrator knows that the auto roll-back feature will revert the managed controller to a previous configuration that was used prior to the change.
Which command can the administrator use to validate that the rollback process is successful?
- A. show controller-ip
- B. show switches
- C. show debug
- D. show config status
Answer: B
NEW QUESTION 57
An administrator wants to change the default roles for the pre- and post-authentication user roles for a WLAN on a Mobility Master (MM). The controllers in the network perform all authentication.
Under the Managed Network hierarchy, where can the administrator assign these roles?
- A. RADIUS attributes
- B. AAA Profiles
- C. VLAN
- D. AAA Server Group
Answer: B
Explanation:
Explanation
References:
In the WebUI1. Navigate to the Configuration > Security > Authentication > AAA Profiles page.2.
Select the default profile or a user-defined AAA profile.3. Click the Initial Role drop-down list, and select the desired user role for unauthenticated users.4. Click the 802.1x Authentication Default Role drop-down list and select the desired user role for users who have completed 802.1x authentication.5.
Click the MAC Authentication Default Role drop-down list and select the desired user role for clients who have completed MAC authentication.6. Click Apply.
NEW QUESTION 58
An administrator wants to implement the MultiZone feature in a company's network to segregate corporate and guest traffic. Corporate traffic will have APs establish connections to a cluster managed by a Mobility Master (MM), and guest traffic will have the same APs establish connections to a standalone controller at the company's DMZ.
What is true about the implementation of MultiZones in this scenario?
- A. The MultiZone feature must be enabled in the data zone.
- B. A MultiZone AP can initially connect to any zone to obtain its configuration.
- C. The primary and data zones must be in the same L2 subnet.
- D. The primary zone maintains full control of AP management and configuration.
Answer: D
NEW QUESTION 59
An administrator manages an Aruba wireless network. Users authenticate to the wireless network using PEAP, where their credentials are validated by the controller's local database. The company purchases Android tablets to use with an inventory tracking system. The administrator notices that many of the users of these devices use their normal username and password to authenticate, which allows the tablet to access all resources that the user can access from their wireless computers. This is a security violation.
Which Aruba Mobility Controller (MC) feature should the administrator configure to restrict tablet access to a web portal for authentication, where an appropriate post-authentication policy can be applied to these tablets?
- A. User-derived rules
- B. Server-derived roles
- C. AP fingerprinting
- D. AirMatch
Answer: A
NEW QUESTION 60
An administrator configures a network scan set in AirWare to scan a subnet to discover new switches. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.
To prevent this problem in the future, what should the administrator complete prior to running the network scan?
- A. Define the SSH communication parameters under the Group's Manage section.
- B. Define the SSH communication parameters under the AP/Device's Manage section.
- C. Define a scan credentials set that includes the SSH communication parameters.
- D. Define the SSH communication parameters for the Default Credentials under Device Setup section.
Answer: D
NEW QUESTION 61
An administrator implements a per-port tunneled node configuration for an Aruba Mobility Controller (MC) thatruns ArubaOS 8.x. The controller performs both MAC and 802.1X authentication.
What must the administrator specify on the controller to allow for 802.1X authentication to succeed?
- A. Define MAC addresses in the local database for the 802.1X users.
- B. Enable server roles in the AAA profile.
- C. Enable L2 Authentication Fail Through in the AAA profile.
- D. Define External RADIUS servers in the AAA profile.
Answer: B
NEW QUESTION 62
Refer to the exhibit. What can the administrator determine from the configuration shown in the exhibit?
- A. All the controllers run in standalonemode.
- B. All the controllers run in a cluster.
- C. VRRP is used for Mobility Master redundancy.
- D. MM2 is the Mobility Master.
Answer: D
NEW QUESTION 63
An administrator wants to use AirWave to manage the configuration policysettings of a set of ArubaOS-Switches. Where should the administrator perform this action?
- A. in APs/Devices
- B. in Device Setup
- C. in AMP Setup
- D. in Groups
Answer: C
NEW QUESTION 64
An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic.
But, when users connect with their wired desktops, they have full access to corporate resources.
What must the administrator do to restrict desktop usage based on the users' role assignment?
- A. Implement per-user tunnel node on the RAP.
- B. Identify the RAP port as untrusted.
- C. Apply a server-derived role privacy to the RAP port.
- D. Implement ACLs on the RAP port.
Answer: A
NEW QUESTION 65
An administrator suspects that the network drops frames between a wireless client and an Aruba Mobility Controller (MC). The administrator wants to examine the frames between the AP and the controller to determine if any frames are missing.
Which solution allows the administrator to use a protocol analyzer to examine the contents of the 802.11 frames between the AP and controller?
- A. Implement bridge mode
- B. Implement split-tunnel mode.
- C. Implement GRE mode.
- D. Implement decrypt-tunnel mode.
Answer: D
NEW QUESTION 66
An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication passes, but the 802.1X user authentication fails for a user who connects?
- A. 802.1X initial user role
- B. Machine authentication default machine role
- C. Machine authentication default user role
- D. 802.1X default user role
Answer: B
NEW QUESTION 67
An administrator implements the Aruba AitGroup feature to accommodate the Apple Bonjour service. In this implementation, which protocol advertises devices such as printers, computers, and their services?
- A. Multicast DNS
- B. Broadcast DNS
- C. LLDP
- D. Multicast DHCP
Answer: A
NEW QUESTION 68
An administrator configures AirGroup policies to define which Apple services are visible and available to wireless users in a campus WLAN. However, the policies are not being enforced.
Where must the administrator enable the AirGroup functionality on the Mobility Master (MM) so that the policies will be in effect?
- A. At the controller level in the Managed Network hierarchy
- B. At the Access Points level in the Managed Network hierarchy
- C. At the global Managed Network hierarchy
- D. At the Mobility Master hierarchy
Answer: C
NEW QUESTION 69
Refer to the exhibit.
What is true about the operation ofthe Aruba Mobility Controller (MC) shown in the exhibit?
- A. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- B. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
- C. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
- D. The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.
Answer: B
NEW QUESTION 70
Which network components are tracked by Aruba Clarity? (Choose two.)
- A. AP and controller health
- B. Client health
- C. Wireless associations
- D. DNS lookups
- E. WLAN health
Answer: B,C
NEW QUESTION 71
An administrator has a cluster of Aruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers.
Before rebooting, which command should the administrator use to move the APs?
- A. active-ap-lb
- B. apmove
- C. lc-cluster move ap
- D. active-ap-rebalance
Answer: B
NEW QUESTION 72
An administrator hasArubaOS-Switches that support tunneled node. The administrator wants to tunnel all user traffic from the Ethernet ports on the switches, and have the controllers authenticate the user traffic and apply the appropriate user role.
Which implementation meetsthese requirements?
- A. Per-port tunneled node with the controllers configured in a cluster
- B. Per-port tunneled node with the controllers configured for standalone mode
- C. Role-based tunneled node with the controllers configured in a cluster
- D. Role-based tunneled node with the controllers configured for standalone mode
Answer: C
NEW QUESTION 73
An administrator creates a user role that department A in a company uses. Various other roles exist for other departments. All employees connect to the same ESSID, which authenticates to an external AAA server. How should the administrator configure to assign the appropriate roles to the employees?
- A. implement user roles
- B. implement AAA profile roles
- C. implement server-derived roles
- D. implement default roles
Answer: C
NEW QUESTION 74
Refer to the exhibit.
An administrator examines theconfiguration of an AP from apboot mode shown in the exhibit.
What can the administrator determine from the configuration?
- A. AP terminated on a Mobility Controller in a cluster.
- B. RAP terminated on a Mobility Master.
- C. AP terminated on a non-cluster Mobility Controller.
- D. RAP terminated on a stand-alone controller.
Answer: A
NEW QUESTION 75
......
How to study the HP HPE6-A71: Aruba Certified Mobility Professional Exam
Preparation of certification exams could be covered with two resource types. The first one is the study guides, reference books, and study forums that are elaborated and appropriate for building information from the ground up. Apart from the video tutorials and lectures are a good option to ease the pain of through study and are relatively make the study process more interesting nonetheless these demand time and concentration from the learner. Smart candidates who wish to create a solid foundation altogether examination topics and connected technologies typically mix video lectures with study guides to reap the advantages of each, but HPE6-A71 practice test or practice exam engines is one important study tool that goes typically unnoted by most candidates. HPE6-A71 practice exams are designed with our experts to make exam prospects test their knowledge on skills attained in the course, as well as prospects become comfortable and familiar with the real exam environment. Statistics have indicated exam anxiety plays a much bigger role in a student's failure in the exam than the fear of the unknown. Actualtests4sure expert team recommends preparing some notes on these topics along with it do not forget to practice HPE6-A71 exam dumps which had been written by our expert team, each of these can assist you loads to clear this exam with excellent marks.
Pass HP HPE6-A71 Exam Quickly With Actualtests4sure: https://surepass.actualtests4sure.com/HPE6-A71-practice-quiz.html
