Updated Sep-2022 Test Engine to Practice Test for 101 Exam Questions and Answers!
Application Delivery Fundamentals Exam Certification Sample Questions and Practice Exam
What Are Most Practical F5 101 Exam Resources?
If you want to accomplish this exam in one try, then you need to make use of different materials during your training. To guide you, below are some excellent reading materials & courses to help you out.
- Official Exam Blueprint
Before anything else, you have to check out the official blueprint for 101. This file summarizes all the important details of the official test, from its key objectives to the most recommended resources. Also, the blueprint highlights the exam subtopics for a more structured learning process. For the exam outline, it consists of 80 questions to be completed in 90 minutes, where most of the items are in a multiple-choice format. The passing score is 69% and the exam fee is $135.
- F5 Networks Application Delivery Fundamentals Study Guide by Philip Jönsson and Steven Iveson
Get it done with this comprehensive guide by two networking professionals. Highlighting the nuts and bolts of ADNs, this book provides an all-inclusive analysis of the key areas that you need to read up thoroughly to pass 101. And these are not just restricted to F5 solutions but also cover OSI model, transportation & app layers, data link, load balancing, switching and routing, security, and delivery platforms. All the pivotal domains are integrated into the 13 chapters of the book with a total of 90 diagrams. After the chapter discussions, go over the practice test with 70 questions. This caps off your training session so you are ready to take your exam with confidence.
- TCP/IP Illustrated, Vol. 1, US Edition by W. Richard Stevens
The second manual that should be in your possession is this excellent guide from W. Richard Stevens. Unlike other books mentioned, this one focuses on a more visual approach to learning. The author opts for an innovative style of teaching by adding illustrations to the lectures to make the content highly understandable. On top of that, the content comes with relevant data that are soured out through diagnostic programs. This results in accessibility to view the vital protocols in a realistic situation. Conveniently, these diagnostic tools don’t have restrictions, which means you can actually check them out at the comfort of your home. Because of this amazing feature, you can get an actual grip of the protocol behavior in a day-to-day operation. Uniquely, the author's writing style is more toned down and yet still very detailed. This gives readers an easier grasp of the TCP/IP protocol suite. The exhaustive coverage of the major topics is also very effective in brushing up your basic comprehension. All the main subject matters are spread out into the 8 chapters of the book. And with the accomplishment of this guide, it fully signifies your understanding of the TCP/IP functions through various layers, including network, application, and transport. Your comprehension also includes different implementations such as Solaris 2.2, Sun OS 4.1.3, BSD/386TM, 4.4BSD, and AIX 3.2.2, together with the latest TCP/IP attributes like long fat pipes, multicasting, and MTU discovery.
- Official Web-Based Courses
Apart from reading different manuals, you can get ready to be proficient with vital F5 products through the official training courses. Considering that F5 101 is the initial passageway for higher-level certification exams, it’s best that you take your time to understand the basic features of F5 solutions through the collection of web-based courses provided by the vendor, which are given for free on their website. Overall, there are several training courses available, which concentrate on significant app delivery networking services. These include F5 SSL Orchestrator, Silverline Services along with BIG-IP ASM, and such. By familiarizing these tools ahead, it would be easy for you to integrate key functionalities into the company’s environment. However, the most suggested among all the options available is “Getting Started with Programmability” because it centers on the foundational technologies necessary for the final exam. But of course, if you have extra time, completing all and even more would put you in a better position to ace 101 test in one go.
- Official Study Guide: 101 – Application Delivery Fundamentals
For an all-inclusive reference of the test objectives, don’t forget the official study guide. Focusing on the core information, such a book explains everything you need to know about the concepts taught by 101. It embarks with an introduction to Open System Interconnection (OSI) layer, its protocols, features, and functionalities. Then, there will be a thorough analysis of FS solutions and technology, along with load balancing and security models. For the last part, it will all be about application delivery platforms.
NEW QUESTION 124
A monitor has been defined using the HTTP monitor template. The send and receive strings were customized, but all other settings were left at their defaults. Which resources can the monitor be assigned to?
Answer:
NEW QUESTION 125
You can use an HTTP class profile to forward traffic that matches which three of these types of criteria?
(Choose three.)
- A. Port
- B. User name
- C. Host name
- D. Protocol
- E. HTTP header
- F. URI path
Answer: C,E,F
Explanation:
Explanation:
NEW QUESTION 126
Which of the following is a valid IP address and prefix length?
- A. 192. 168.:0 177/25
- B. 192 168:0. 129/25
- C. 192.168:0 128/25
- D. 192 168 :0 255/25
Answer: B
NEW QUESTION 127
An inline ASM configuration requires:
- A. None of the above
- B. Two network connections
- C. Two disk drives
- D. Two power supplies
Answer: B
NEW QUESTION 128
In the current version of BIG-IP, what happens if the GTM does not find a wide IP that
matches the DNSrequest?
- A. It uses iQuery to request the information from LTM
- B. It sends the request to an external DNS
- C. It sends an un-resolvable error to the client
- D. It sends a request to its configured backup GTM device
- E. It sends a broadcast request to all GTM devices
Answer: B
NEW QUESTION 129
What is a characteristic of iQuery?
- A. It uses SSL.
- B. It uses SCP.
- C. It uses HTTPS.
- D. It uses SSH.
Answer: A
NEW QUESTION 130
A site needs to terminate client HTTPS traffic at the BIG-IP and forward that traffic unencrypted.
Which two are profile types that must be associated with such a virtual server. (Choose two.)
- A. HTTP
- B. HTTPS
- C. ClientSSL
- D. TCP
- E. ServerSSL
Answer: C,D
NEW QUESTION 131
Identifying users by their IP address is a sufficient method of performing authentication andauthorization.
- A. True
- B. False
Answer: B
NEW QUESTION 132
in which scenario would an SSL VPN solution have an advantage over an IPSec VPN?
- A. when users work remotely
- B. when users require the ability to RDP to internal resources
- C. when users are unable to install software on their PC
- D. when users require a secure connection to the corporate network
Answer: A
NEW QUESTION 133
Which two daemons only run after the entire license process has been completed? (Choose two.)
- A. zrd
- B. ntpd
- C. gtmd
- D. tmm
Answer: A,C
NEW QUESTION 134
Which three of the following must be done in order for GTM to properly communicate LTM? (Choose three.)
- A. Add the LTM object to the GTM configuration.
- B. Configure the GTM and LTM to we MAC masquerading.
- C. Connect the GTM and LTM with a network crossover cable.
- D. Synchronize the big3d versions between GTM and LTM.
- E. Exchange SSL certificates between the two devices.
- F. Ensure that GTM and LTM use the same floating IP address.
Answer: A,D,E
Explanation:
Integrating LTM systems with GTM systems on a network
Running the bigip_add utility
Determine the self IP addresses of the BIG-IP LTM systems that you want to communicate with BIG-IP GTM.
Run the bigip_add utility on BIG-IP GTM. This utility exchanges SSL certificates so that each system is authorized to communicate with the other.
When the LTM and GTM systems use the same version of the big3d agent, you run the bigip_add utility to authorize communications between the systems.
http://support.f5.com/kb/en-us/products/big-ip_gtm/manuals/product/gtm-implementations11-3-0/7.html Note:
The BIG-IP GTM and BIG-IP LTM systems must have TCP port 4353 open through the firewall between the systems. The BIG-IP systems connect and communicate through this port.
NEW QUESTION 135
In the following configuration, a virtual server has the following HTTP class configuration:
A request arriving for WWW.F5.COM will be matched by which class(es)?
- A. Both Class 1 and Class 2
- B. Class 1
- C. The request will be dropped
- D. Class 2
Answer: D
NEW QUESTION 136
If LTM uses the round robin load balancing method, which pool member in the diagram above will receive thenext request?
- A. C
- B. B
- C. D
- D. A
Answer: B
Explanation:
Explanation/Reference:
LTM uses the round robin load balancing method so after A will be B
NEW QUESTION 137
Which three methods can be used for initial access to a BIG-IP system. (Choose three.)
- A. HTTP access to any of the switch ports
- B. HTTPS access to any of the switch ports
- C. SSH access to any of the switch ports
- D. HTTP access to the management port
- E. HTTPS access to the management port
- F. SSH access to the management port
- G. CLI access to the serial console port
Answer: E,F,G
NEW QUESTION 138
An administrator needs to allow secure access to application within the corporate data center for remote office, branch office and mobile employees.
Which F5 product provides this functionally?
- A. AFM
- B. APM
- C. GTM
- D. ASM
Answer: B
NEW QUESTION 139
The least connections load balancing method functions best when all pool members share similar characteristics.
- A. False
- B. True
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 140
Which of the following are four of the benefits of the TMOS architecture? (Choose four.)
- A. Server-side optimization
- B. Dynamic DDoS protection
- C. Antivirus checking
- D. User authentication
- E. Client-side optimization
- F. Web application security
Answer: A,B,E,F
Explanation:
Explanation/Reference:
NEW QUESTION 141
An F5 customer must install WebAccelerator on top of LTM:
- A. True
- B. False
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 142
You have a pool of servers that need to be tested. All of the servers but one should be tested every 10 seconds, but one is slower and should only be tested every 20 seconds.
How do you proceed.
- A. It cannot be done. All monitors test every five seconds.
- B. It can be done, but will require assigning monitors to each pool member.
- C. It cannot be done. All of the members of a pool must be tested at the same frequency.
- D. It can be done by assigning one monitor to the pool and a different monitor to the slower pool member.
Answer: D
NEW QUESTION 143
When is the server also a client?
- A. during a passive FTP session
- B. While receiving email
- C. While uploading files
- D. during an active FTP session
Answer: D
NEW QUESTION 144
A GTM System performs a name resolution that is not a Wide-IP. The name is in a domain for which the GTM System is authoritative. Where does the information come from?
- A. It comes from the database of previously cached name resolutions.
- B. It comes from BIND database (zone) files on the GTM System.
- C. It comes from a zone transfer initiated when the request was received.
- D. GTM System cannot resolve a host name that is not a Wide-IP.
Answer: B
NEW QUESTION 145
ASM provides antivirus protection by:
- A. Running a local antivirus program on the BIG-IP
- B. None of the above
- C. Using IP Penalty enforcement to block requests from hackers IPs
- D. Extracting files being uploaded and sending them to an AV system via ICAP
Answer: D
Explanation:
Supported ICAP Servers in TMOS 11.5:
NEW QUESTION 146
The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B.
Given the virtual server, pool, and persistence definitions and statistics shown in the above graphic, which member will be used for the next connection?
- A. 10.10.20.1:80
- B. 10.10.20.5:80
- C. 10.10.20.4:80
- D. 10.10.20.2:80
- E. It cannot be determined with the information given.
- F. 10.10.20.3:80
Answer: F
NEW QUESTION 147
________% of F5 products are sent through thorough software testing before being sold to customers.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 148
......
Certification dumps F5 Networks Certification Study Materials 101 guides - 100% valid: https://surepass.actualtests4sure.com/101-practice-quiz.html
